air outlets | Ceiling Diffuser
Jet Diffuser
Construction
1 – Panel
Made from high quality heavy aluminum sheet.
2 – Panel frame
Made from high quality extruded aluminum profile with 30 mm flange width as standard and non standard widths are available as option.
3 – Inner rings
Aluminum spun rings.
Description
Framed and inner rings are high quality aluminum construction with powder coated color finish.
Generally designed for wall mounting for ceiling mounting. drill 2 to 4 holes in the face of the flanged border.
Nozzles can be adjusted 30 upwards and down words to achieve required throw as per site condition. Nozzle jet can be rotated by 360 by adjusting the mounting frame.
Jet nozzles can be supplied with plenum box. which is manufactured from galvanized steel sheet as option.
Plenum boxes can be supplied with round damper as option.
Jet nozzle available from 100 mm diameter to 400 mm as standard and non-standard sizes are available as option.
Jet nozzle available with 160 mm depth as standard and greater than 160 mm is available for higher throw.
Powder coated color finish per RAL color codes as standard and flexibility of finish.
Variants
Single element
Multiple element
Performance Data
jet diffuser
at 0 deflection
- Neck velocity is measured in m/sec.
- Ps: static pressure loss across the diffuser in mm of H2O.
- Throw (meters) is measured for a terminal velocities of 0.25, 0.5 & 0.75 m/sec.
- Noise criteria (NC) based on a room attenuation of 10 db.
Copyright reserved. Specification subject to change without notice.
Performance Data
Jet diffuser
at 30 deflection
- Neck velocity is measured in m/sec.
- Ps: static pressure loss across the diffuser in mm of H2O.
- Throw (meters) is measured for a terminal velocities of 0.25, 0.5 & 0.75 m/sec.
- Noise criteria (NC) based on a room attenuation of 10 db.
- Copyright reserved. Specification subject to change without notice.
Jet Nozzle
- Jet nozzles are developed for large and high area, such as airports, shopping centers, show centers, theaters etc.
- It ensures a long throw (25m) at high outlet velocities.
- The ball can be oriented 30°angle.
- They are used for cooling or heating with the characteristic of orientation.
- Rotated by manual or motor control.
- Material:They are made of aluminum sheet.
- Accessories:Damper (butterfly damper in plastic or steel manual control; radial-shape damper screw control).
- Mounting:Ceiling or wall mounting by screws, or collected into a circular duct.
- Finishing:White powder coating RAL 9016, RAL 9010, or customized color.
Jet Nozzle Size Data
Jet Nozzle Data
Jet Nozzle Spec. Data (JD-VA)
Jet Nozzle Spec. Data (JD-VB)
Drum Jet Diffuser
Drum jet diffuser is designed to meet the requirements of low pressure drop, quiet operations, long distance throw and good air spread in large areas.
The air flow direction can be oriented up and down by rotating the cylindrical inner casing in a 60°angle.
The air flow direction can be oriented left and right by adjusting the blades on the inner casing.
Material: They are made of aluminum sheet.
Mounting: wall mounting by screws, or collected into a rectangular or circular duct.
Finishing: White powder coating Ral9016, Ral9010, or customized color.
Material: They are made of aluminum sheet.
Mounting: Wall mounting by screws, or collected into a rectangular or circular duct.
Finishing: White powder coating RAL 9016, RAL 9010, or customized color.
How to order
